View topic - D A Gear ratio

dodgebrothersclub.org
http://dodgebrothersclub.org/phpbbforum/

D A Gear ratio
http://dodgebrothersclub.org/phpbbforum/viewtopic.php?f=3&t=40
Page 1 of 1

Author:  Guest [ Sun Jan 08, 2012 11:42 am ]
Post subject:  D A Gear ratio

Does anyone know of a bolt on higer gear ratio for the DA. 4.73 seems low for today driveing.
Vern

Author:  DaveWollam [ Sun Jan 29, 2012 3:51 pm ]
Post subject:  Vern, the Victory Six is a

Vern, the Victory Six is a little taller geared, I think 4.56 or something close to that. The center section, or "pumpkin" should fit right in.

Author:  Guest [ Mon Jan 30, 2012 11:44 pm ]
Post subject:  da ratio

Thanks Dave,
While I was getting the Dakota inspected today I was going thu a parts book on ring and pinion gears and thought MAY B we could fine a suitable gear ratio like 3.9-1 and make it fit Will be looking into this .

Vern

Author:  Guest [ Wed Feb 01, 2012 1:31 am ]
Post subject:  Victory Diff

Here in Australia a few guys have fitted Victory diff centrs to their D.A.s with little effort.
I even have one in line for my ute when the time comes to pull the original out for any reason.

Author:  Guest [ Wed Feb 01, 2012 10:54 pm ]
Post subject:  DA Rato

Graham;
Do you know if the victroy swap help ?

Vern

Author:  Guest [ Wed Feb 01, 2012 10:55 pm ]
Post subject:  DA Rato

Graham;
Do you know if the victroy swap help ?

Vern

Author:  Guest [ Tue Feb 28, 2012 3:06 am ]
Post subject:  Re: D A Gear ratio

hi Vern
Sorry for the delay. I only get on this forum occasionally and i may have my wires crosed a bit as it may be the fast 4 centr they used. It's so long ago now.
I remember that th front adjusting nuts are different on the one they used ( one instead of 2).
These cars were much lower revving at highway speed.
Sorry for the confusion
Graham

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/