View topic - 1915 Dodge gauge attachment

dodgebrothersclub.org
http://dodgebrothersclub.org/phpbbforum/

1915 Dodge gauge attachment
http://dodgebrothersclub.org/phpbbforum/viewtopic.php?f=3&t=576
Page 1 of 1

Author:  MikeBarnes [ Wed Jul 17, 2019 12:33 am ]
Post subject:  1915 Dodge gauge attachment

Strange story: two summers ago I left my 1915 Dodge in the driveway. When I came back to it later, there were a few loose wires under the dash, and the “Battery / Charge” gauge was completely pushed back away from the front of the dashboard. It was as if someone tried to “hot wire” my old touring car. What a getaway that would have been! Anyway, how should this gauge be correctly attached? At present it just floats. I don’t see any way of anchoring it from behind. Was the glass glued to the shiny round frame that is held by three long machine screws? Thanks, Mike, Vancouver

Author:  MikeBarnes [ Thu Jul 18, 2019 7:25 pm ]
Post subject:  Re: 1915 Dodge gauge attachment

Because forums are meant to be inforumative, I will answer my own post, with picture. I think the gauge was originally attached to the shiny ring that screws into the dash. Because when I felt one and the other, both were rough surfaces, like a broken pot-metal casting. I used a bit of quick epoxy to reattach gauge to frame.

Attachments:
gauge1.JPG
gauge1.JPG [ 60.12 KiB | Viewed 10130 times ]

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/