Hi Darryl, welcome to the DBC
hard to say for sure on the gauges without cross referencing parts books specific to your year/model. One way to tell is to double check the parts number (if it's stamped and "IF" it's legible) on the back of each individual gauge.
EDIT: Sorry guys, was having problems with double posting last night and error after error so had to wait to clean up this post.
As Doug says below, contacting other Standard owners is another way to verify.
With all due respect to Doug (he's helped me a ton and very helpful to all in the DB/GB community), one word of caution is : sometimes gauges may have been changed so what one owner claims as original, may have been replaced without their knowledge in the past. Unless you get a fully documented original Standard that is proven to be non-tampered with I would still seek to double check against any known data in parts books (if you are wanting to be as close to original as possible).
Beautiful Cantrell example and glad to see it's in good hands. Thanks for sharing
Attachments: |
IMG_2135.JPG [ 893.22 KiB | Viewed 25608 times ]
|
|