View topic - 1928 Fast Four Model 129 Suspension

dodgebrothersclub.org
http://dodgebrothersclub.org/phpbbforum/

1928 Fast Four Model 129 Suspension
http://dodgebrothersclub.org/phpbbforum/viewtopic.php?f=3&t=606
Page 1 of 1

Author:  danritzinger [ Wed Jan 15, 2020 12:08 am ]
Post subject:  1928 Fast Four Model 129 Suspension

I have complete front and rear suspension assemblies (including differential, tie rod, brake hardware, wheels, tires, etc.) that I removed from my 1928 Dodge Brothers Model 129 (4-wheel brakes, 19-inch wheels). I am offering them for sale, but have no idea of what they're worth. If they're something you can use, please shoot me an offer. Thanks!

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Attachments:
fa1.jpg
fa1.jpg [ 410.57 KiB | Viewed 13523 times ]

Author:  danritzinger [ Sat Jan 18, 2020 2:53 am ]
Post subject:  Re: 1928 Fast Four Model 129 Suspension

I CAN BE REACHED AT danritz@pair.com

Author:  PaulHossfeld [ Sat Jan 18, 2020 10:49 am ]
Post subject:  Re: 1928 Fast Four Model 129 Suspension

do you know the gear ratio? Or can you get the part number off the rear end?
Thanks

Author:  danritzinger [ Sat Jan 18, 2020 1:56 pm ]
Post subject:  Re: 1928 Fast Four Model 129 Suspension

I have no idea on the ratio. We're in the middle of a blizzard here, but I'll try to check this weekend sometime for stampings on the case and let you know what I find. Thanks.

Author:  danritzinger [ Sat Jan 18, 2020 5:58 pm ]
Post subject:  Re: 1928 Fast Four Model 129 Suspension

Well, I was able to make my way to the steel shed through the snow and wind. The differential, still attached to the springs, is really wedged in with other parts in storage. I just moved it out there for the winter from my heated shop earlier this week. I was able to scope out the top and rear of the case using a flashlight, and found no ID of any kind. Perhaps someone more knowledgeable on '28 Dodge Brothers could supply some info on the differentials that were used in those cars. Otherwise, come March I should be able to wheel this one out of the shed and give it a thorough examination.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/