- Home
- Club Information
- Connect
- Garage/Information
- Spark Plugs
- Tips and Kinks
- TuneUp Charts
- DB Paint Colors
- Books of Information
- Burchill Collection
- Burchill Collection Part 2
- DB Bearings
- DB Bumper Info
- DB Muffler Info
- DB Production Dates
- DB Springs & Bushings
- Dodge Brothers 1922-1934 Confidential Information
- Dodge Brothers 1928 Confidential Information
- Dodge Brothers Dealer Invoices
- Dodge Brothers Dealer Sales Contracts
- Dodge Brothers Patents
- Dodge Brothers Production Documents
- Dodge Brothers Production Photos
- Dodge Brothers Service Bulletins
- Dodge Brothers Videos
- Dykes Engine Encyclopedia
View topic - LED tail light conversion
| dodgebrothersclub.org http://dodgebrothersclub.org/phpbbforum/ |
|
| LED tail light conversion http://dodgebrothersclub.org/phpbbforum/viewtopic.php?f=3&t=622 |
Page 1 of 1 |
| Author: | Guest [ Wed May 27, 2020 12:25 pm ] | ||
| Post subject: | LED tail light conversion | ||
I am looking for information on converting my Type B tail light to LED. Restoration Supply has the pieces but I do not know how to complete the conversion. The “DB Club News” may have an article but I don’t have a good index.
|
|||
| Author: | JackBennett [ Sat Jan 30, 2021 4:44 pm ] |
| Post subject: | Re: LED tail light conversion |
Greetings from Lakewood, Washington. I see that your post Re: Conversion to LED tail light is aging as unanswered. Hopefully you have worked through this project with a great level of success and satisfaction. If so, this post is simply to say hello. If not, I recently converted my 1927 Willys Knight from incandescent bulbs to LED’s, and with exception of the headlights, am really pleased with the results. I am currently restoring a 1923 DB Roadster and (probably) will eventually convert it to LEDS also. The Willys was a necessary conversion because I was super dissatisfied with its 6 volt, positive ground system, and a set of lights that you’d need a flashlight to see if they were even on. This link https://www.ledlight.com/ will take you to a company which sells LED’s which are a direct exchange for your incandescent bulbs, and will work with your existing sockets. I did change my sockets because I installed turn signals and single bulb/dual filament tail/brake lights and converted the cowl lights to park/turn signals. The only complication you will encounter is the turn signal flasher used with the incandescent bulbs will need to be replaced with one intended for use with the LED’s. Good luck. Jack |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|
DODGE BROTHERS CLUB©,INC. Founded 1983 Incorporated 1986 for the research and preservation of Dodge Brothers Motor Vehicles and Graham Brothers Commercial Vehicles, 1914-1938. DODGE BROTHERS CLUB NEWS© Dodge Brothers Club News ISSN 10600817 is published bi-monthly. Regular issues in the volume are: Jan/Feb, Mar/Apr, May/Jun, Jul/Aug, Sep/Oct, Nov/Dec.
