View topic - Oil pan installation

dodgebrothersclub.org
http://dodgebrothersclub.org/phpbbforum/

Oil pan installation
http://dodgebrothersclub.org/phpbbforum/viewtopic.php?f=3&t=638
Page 1 of 1

Author:  Guest [ Sat Aug 01, 2020 6:57 pm ]
Post subject:  Oil pan installation

2925 touring. Trying to put oil pan on. Help. Have done everything possible. Done what mechanic and instruction manuals say. No luck. Should I lift motor remove mount and put on???

Author:  natbradshaw [ Sat Aug 01, 2020 8:33 pm ]
Post subject:  Re: Oil pan installation

I'm beginning to think you need to follow experience based guidance.

Author:  natbradshaw [ Mon Aug 10, 2020 9:44 am ]
Post subject:  Re: Oil pan installation

Miles;
The oil pan instructions, (for engines with square head bolts in the rear), say only to make sure the rear oil felt is in place, the oil level indicator is through the hole in the block and to put the front of the pan in first then raise the rear into position.
Maybe someone who has done this before will offer better advice than I have.

Author:  MarkKilby [ Thu Aug 13, 2020 10:32 pm ]
Post subject:  Re: Oil pan installation

When I replaced my pan, I bought a cheap 2' hard plastic vacuum line that fit the hole snugly and also on the oil rod and would hold it in position. Made much easier fitting the oil rod into the hole and kept it there while lifting pan.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/