View topic - Thermostat wire location

dodgebrothersclub.org
http://dodgebrothersclub.org/phpbbforum/

Thermostat wire location
http://dodgebrothersclub.org/phpbbforum/viewtopic.php?f=3&t=720
Page 1 of 1

Author:  toddslaubaugh [ Mon Mar 14, 2022 5:43 pm ]
Post subject:  Thermostat wire location

Where does the thermostat wire hook up to and location on a 1929 da motor? I can't seem to locate it.

Author:  DougWalters [ Mon Mar 14, 2022 6:00 pm ]
Post subject:  Re: Thermostat wire location

What is a thermostat wire?

Author:  toddslaubaugh [ Mon Mar 14, 2022 6:33 pm ]
Post subject:  Re: Thermostat wire location

Tempature gauge wire

Author:  DougWalters [ Mon Mar 14, 2022 8:40 pm ]
Post subject:  Re: Thermostat wire location

A DA doesn't have a temperature gauge. At least in '29 they didn't.

Author:  toddslaubaugh [ Tue Mar 15, 2022 2:12 pm ]
Post subject:  Re: Thermostat wire location

Ok, makes sense. Thanks

Author:  Shermstake [ Wed Mar 16, 2022 1:24 pm ]
Post subject:  Re: Thermostat wire location

Attachment:
D5F6B98E-126A-4EC5-BBC3-D102B9E10B03.jpeg
D5F6B98E-126A-4EC5-BBC3-D102B9E10B03.jpeg [ 123.78 KiB | Viewed 18648 times ]
Here is temp gauge location for my 29 DA6 in my DB truck.

Sorry not to good submitting. Note the sending unit mounted on water intake manifold.

Author:  Shermstake [ Wed Mar 16, 2022 1:27 pm ]
Post subject:  Re: Thermostat wire location

Attachment:
42978D13-38FB-479E-91D2-EA61E4688A26.jpeg
42978D13-38FB-479E-91D2-EA61E4688A26.jpeg [ 99.83 KiB | Viewed 18647 times ]


Sorry for not submitting correctly.
Note sending unit on the top of the water intake manifold.

Author:  toddslaubaugh [ Sun Apr 03, 2022 4:03 pm ]
Post subject:  Re: Thermostat wire location

Those are great pictures shermstake. Could I get a pic of the driver side of the engine compartment? Trying to figure how to hook up cable to distributor. Another question too. Where do the spark plug wires go on the distributor cap? I am not very knowledgeable about these engines. Trying to learn.

Author:  toddslaubaugh [ Sun Apr 03, 2022 4:04 pm ]
Post subject:  Re: Thermostat wire location

I also have a dodge truck with da6 motor

Author:  DougWalters [ Sun Apr 03, 2022 5:58 pm ]
Post subject:  Re: Thermostat wire location

Sherm, is the round gauge beside the cluster the face for the temp? I am sure DA cars do not have that. What brand of gauge is it?

Author:  Shermstake [ Mon Apr 04, 2022 1:22 pm ]
Post subject:  Re: Thermostat wire location

The existing temp gauge was badly rusted and I do not know the maker. I am not aware of pass cars.

Attachments:
7F454BA0-E96D-427C-A694-969075878C11.jpeg
7F454BA0-E96D-427C-A694-969075878C11.jpeg [ 144.55 KiB | Viewed 18415 times ]

Author:  toddslaubaugh [ Mon Apr 04, 2022 2:46 pm ]
Post subject:  Re: Thermostat wire location

Thanks for the pic. Could I see the linkage behind the horn? That is where I am having issues putting back together. Also did you have the radiator modified to have the outlet come out the bottom right side?

Author:  Shermstake [ Wed Apr 06, 2022 12:09 pm ]
Post subject:  Re: Thermostat wire location

toddslaubaugh wrote:
Thanks for the pic. Could I see the linkage behind the horn? That is where I am having issues putting back together. Also did you have the radiator modified to have the outlet come out the bottom right side?


This is the correct location for both inlet and outlet of the truck radiator for this year. No modification.

Also the dash has a place for the temp gauge. It is the round opening next to the cluster.

Author:  DavidYoung [ Sat Apr 09, 2022 7:42 am ]
Post subject:  Re: Thermostat wire location

toddslaubaugh wrote:
Another question too. Where do the spark plug wires go on the distributor cap? I am not very knowledgeable about these engines. Trying to learn.


These instructions should help if you're asking about firing order

Also, here is a link to your distributor cable question that may help. See post #2 what Mattl430 posted and post #3 what BobZ posted
https://forums.aaca.org/topic/373528-da ... nt-2321542

BTW, I believe the round gauges were made by National and the newer oval shaped ones on trucks were made by North/East

Don't have a pic of the horn bracket for the DA cars. You may need a owners manual for DA6 cars in order to find that. On second thought I think I have a DA6 car owners manual around here somewhere. If I find it I'll post a pic of how the horn bracket setup looks.

Lastly, the DA6 truck lower water outlet was opposite side from the car radiators.

Attachments:
DA2.jpg
DA2.jpg [ 82.18 KiB | Viewed 18313 times ]
DA1.jpg
DA1.jpg [ 90.94 KiB | Viewed 18313 times ]

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/